Draining and Storing Your Chiller Like a Pro: A Step-by-Step Guide

  • Updated

Draining and Storing Your Chiller Like a Pro: A Step-by-Step Guide

Introduction: Hey there, chill-seekers! Whether you've been enjoying the icy depths or preparing for maintenance, knowing how to drain your chiller is a must. In this guide, we'll walk you through the process step by step, ensuring you can drain your chiller like a seasoned pro. But before we dive in, remember to power down your entire plunge system for safety. Now, let's get started!

  1. Power Down Your Entire Plunge System:

  • Ensure your entire plunge system, including the chiller, is safely powered down and disconnected from any power source. Safety first!

  1. Disconnect the "In" and "Out" Chiller Connections:

  • Locate the "In" and "Out" connections on your chiller.

  • Carefully disconnect these connections from the chiller. This will ensure water doesn't spray everywhere during the drainage process.

  1. Turn Your Chiller Upside Down:

  • Gently, but confidently, turn your chiller upside down. This will allow the water to flow out through the "In" and "Out" ports.

  1. Caution: Don't Rest the Ports on the Ground:

  • Here's the crucial part: Be extra cautious not to rest the "In" and "Out" ports directly on the ground. The ports are delicate and could break if they're subjected to too much pressure.

  1. Let the Water Drain:

  • As your chiller is upside down, let gravity do its work. The water will naturally flow out from the "In" and "Out" ports.

  1. Wait Until Fully Drained:

  • Be patient. Ensure that all the water has fully drained from the chiller before moving on.

  1. Carefully Upright Your Chiller:

  • Once you're sure the chiller is empty, gently turn it right side up.

  1. Clean and Store for Longevity:

  • After the drainage is complete, give your chiller a thorough cleaning.

  • To ensure its protection and longevity, store the chiller in a dry, temperature-controlled room.

  • Proper storage will help safeguard your chiller for many more chilly adventures to come.

  1. Allow Chiller to Rest Before Turning Back On:

  • Before you excitedly reconnect your chiller to the plunge system and power it back on, exercise a little patience.

  • It's essential to let the chiller rest for a minimum of 4 hours. This allows the coolant to settle and ensures optimal performance.

  • Rushing this step can lead to a chiller that fails to cool efficiently.

With these steps, you can confidently drain your chiller without any worries. Remember to handle those "In" and "Out" connections and ports with care, and enjoy the safe and hassle-free process. Now, you're ready to chill out or perform maintenance without a hitch. Happy chilling!

Was this article helpful?

2 out of 2 found this helpful

Have more questions? Submit a request



Please sign in to leave a comment.