Clean Out the Pump

Clean Out the Pump

1. Power down the Plunge
2. Drain the Plunge
3. Remove all four screws so the Pump can come completely off
4. Remove the four bolts in the head of the pump
5. Twist the end piece and remove to expose the impeller
6. Clean out the impeller. It can be fully removed and
cleaned out.
7. Make sure O ring is put back in place when putting the pump
back together.
8. Reinstall the pump back onto the Plunge with the square
pad in between.

Was this article helpful?

0 out of 6 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.