Setting Up the Plunge Air Tub

  • Updated

Read First Before Setting Up Your Plunge

Please read the Safety Precautions and Warranty before setting up the Plunge Air.

Set Up

Step 1: Placing the Protective Ground Cover

  • Find the gray protective ground cover and unwrap it. Cover Dimensions: 63”x37”
  • Clear the area where you intend to place the Plunge of debris. 
  • Place the ground cover on a waterproof location of your choice.*

*Note: If you purchased the Evolve Pro Chiller, please follow the location requirements in the chiller manual.

Plunge_Air_Step1.png

Step 2: Placing the Plunge Air

Unwrap the Plunge Air and place it on top of the gray protective mat. 

Plunge_Air_Step2.png

Step 3: Inflate the Plunge Air

Connect the black air pump and inflate the tub until it reaches 8 PSi.

Plunge_Air_Step3.png

Step 4: Inflate the Cover

Connect the black air pump and inflate the cover to 8 PSi.

 

Plunge_Air_Step4.png

warning sign" Emoji - Download for free ... If you purchased the Evolve Pro Chiller, continue with the instructions provided with the chiller or go here. warning sign" Emoji - Download for free ...

Step 5: Secure Manifold Plugs

  • Find the manifold plugs pictured and place them on the drain and jet manifold, sealing them closed.
  • Make sure to tighten the collars and the drain valve until they are hand-tight to prevent leaking.
Step 4.png

Step 6: Fill the Plunge Air With Water

  • Make sure the white drain valve is in the closed position (perpendicular to the tub).
  • Fill the Plunge Air with water until it reaches 4 inches from the top.
Plunge_Air_Step6.png

Step 6: Add Ice and Dive in!

Step 4 (1).png

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.