Setting Up the Plunge Pop-Up Tub

Updated August 16, 2024 22:41

Read First Before Setting Up Your Plunge

Please read the Safety Precautions and Warranty before setting up the Plunge Pop-Up.

When using the Plunge Pop-Up in a cold environment, soak the tub in warm water for 2-3 minutes. This will make set up easier.

Set Up

Step 1: Placing the Plunge Pop-Up

Choose a waterproof location to place the Plunge Pop-up and remove all debris.
Unwrap the Plunge Pop-Up and place it.
The tub is 34 inches in diameter at the top ring.

Step 1.png

Step 2: Pop-Up Poles

Insert the 6 poles into their respective slots around the tub.

Step 2.png

Step 3: Inflate Top Ring

Locate the black hand pump and use it to inflate the top ring.
The Pop-Up will begin to take shape, but please note that it may not be a perfect circle until you fill it with water.

If you purchased the Evolve Pro Chiller please go here.

If you purchased the Evolve Standard Chiller please go here.

Step 4: Secure Manifold Plugs

Find the manifold plugs pictured and place them on the drain and jet manifold, sealing them closed.
Make sure to tighten the collars and the drain valve until they are hand-tight to prevent leaking.

Step 4.png

Step 5: Fill the Plunge Pop-Up

Make sure the white drain valve is in the closed position (perpendicular to the tub).
Fill the Plunge Pop-Up with water until it reaches 4 inches from the top.

Step 5.png

Step 6: Add Ice and Plunge!

Step 4 (1).png

Was this article helpful?

2 out of 3 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.