Changing Your Water Filter (Residential)

  • Updated

 

In this video, we break down the water filter replacement procedure for your Plunge unit so you can keep your unit water sparkling clean. 
 

CHANGE YOUR FILTER. (EASIEST TO
DO WHEN EMPTY). IF FULL, FOLLOW
INSTRUCTIONS BELOW:
1. On top of the filter, turn the blue diverter a quarter turn counter
clockwise using the handle of the filter wrench.
2. Use the filter wrench to loosen the filter canister.
3. Replace the filter.
4. Make sure the black O-ring is still in place on top of the filter.
5. Hand tighten filter back on.
6. Turn the blue diverter a quarter turn counterclockwise so that filtration
returns to the system.

We recommend doing this monthly or as needed. 

Older models

If you own a model older than March 1st, 2023. You will be using the GE filter.

Was this article helpful?

3 out of 4 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.