Changing Your Water Filter (Commercial)

  • Updated

 

In this video, we break down the water filter replacement procedure for your commercial cold plunge unit so you can keep your unit water sparkling clean. 
 
 

CHANGE YOUR FILTER. (EASIEST TO
DO WHEN EMPTY). IF FULL, FOLLOW
INSTRUCTIONS BELOW:
1. Turn the white diverter valve to the right.
2. Use the filter wrench to loosen the filter canister.
3. Replace the filter.
4. Make sure the O-ring is still in place.
5. Hand tighten filter back on.
6. Turn the white diverter valve back to the left position.

We recommend doing this bi-monthly or as needed. 

Was this article helpful?

2 out of 2 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.