Connect Your Plunge Sauna to the Plunge Mobile App

The following article explains how to pair your sauna with the Plunge mobile app. Once connected, you can control your sauna remotely, allowing you to set heating times, adjust temperature, and monitor it in real-time. 

Before you can pair the mobile app, you must make sure that your sauna is connected to the internet. 

Adding a Sauna for the first time

	Navigate to "My Products" and tap "Add Product".
	Complete the tutorial of setting up your plunge until you get to the section where you enter your sauna ID and code.
	Find the ID and CODE depending on your sauna model: XL/ST = Printed on/below the electrical box located on the side of your sauna and enter it in. Mini = Printed on the electrical box located under the foot rest mounted to the left of the heater.
	Once connected, your sauna app controls will light up.

From the "Connect Sauna Now"

	From "My Products" and tap "Connect Sauna now".
	Enter your sauna ID and code.
	Once connected, your sauna app controls will light up.