Cleaning the Ventilation Screens (Plunge All-In)

Tubs Compatible With These Instructions: 

• Plunge All-In
• Plunge All-In Commercial 
• Plunge All-In Commercial Max

Cleaning the Ventilation Screens 

1. Remove the screen by pulling up on the bottom lip of the screen and pulling it out. 
2. Take it to the sink and run water through the inside portion of the screen allowing all the dust and debris to wash off.
3. Shake the water out and let it air dry for a few minutes.
4. Reinsert the screen by putting the top lip in first and gently pressing it back into place.

Frequency Requirements: 

• Plunge All-In Residential - Every 3 months at minimum
• Plunge All-In Commercial - Every 3 months at minimum
• Plunge All-In Commercial Max - Every 3 months at minimum