As summer temperatures rise, your Plunge works harder to keep things cool. A little extra care goes a long way—this checklist will help you keep your Plunge clean, efficient, and reliable all summer long.

✅ 1. Give Your Plunge Room to Breathe

Proper airflow and ventilation are critical for chiller performance—especially during hot weather. Now is the time to check your spacing and placement.

Select your model for specific requirements:

• Gen 1 Plunge Spacing Requirements

• Evolve Pro Chiller Spacing Requirements

• Evolve Standard Chiller Spacing Requirements

• All-In Spacing Requirements

• All-In Max Spacing Requirements

🚫 2. Protect Your Plunge from Sprinklers and Garden Hoses

The Plunge is built to handle vertical water (like rain), but horizontal water (like sprinklers or garden hoses) can damage the chiller and internal components.

Avoid direct spray from:

• Sprinklers

• Garden hoses

• Pressure washers

💧 3. Ensure Proper Water Flow and Cleanliness

Proper water flow is essential for system health and cooling efficiency. Dirty or low-flow water forces the chiller and pump to work harder—especially in the heat.

Follow these best practices:

• Follow your Water Maintenance Manual

• Skim leaves or debris daily

• Clean tub drains every other day

• Replace the filter at least once per month (more often in dusty/pollen-rich areas)

• Deep clean the Plunge every 6–9 months

View Water Maintenance Manuals

⚡ 4. Ensure Proper Electrical Setup

Using an Extension Cord?

• Must be 12 gauge, no longer than 10 feet

• Follow all safety guidance in your Plunge manual

• Refer to NEC requirements for your jurisdiction

Outdoor Plunge Setup

• Use outdoor-rated power cords and outlets

• Use a weatherproof outlet cover that fully encloses the GFCI plug

• Use a Weatherproof Connection Box for extension cord connections

🌤️ 5. Shade Your Plunge if Possible

All Plunge models are outdoor-rated, but direct sun exposure makes the chiller work harder, increasing wear and power usage.

Pro Tips:

• Place the tub in a shaded area

• Use a canopy, umbrella, or cover when not in use

• For commercial Plunges with auto-dosers, the auto-doser must stay shaded

📲 6. Check for Firmware Updates (Evolve Pro & All-In Only)

Make sure your Plunge is running the latest firmware. Updates improve:

• System performance

• Efficiency

• New feature support

Use the app to check for updates and install the latest firmware.

💦 7. Understanding Condensation (vs. Leaks)

Seeing moisture on your Plunge or a small puddle nearby? In summer, this is likely normal condensation, not a leak.

To confirm:

1. Place tape on the current water line inside the tub

2. Wait 24 hours (no use or added water)

3. Recheck the water level

If the level hasn’t dropped, it’s just condensation.
If it has dropped, contact our support team and we’ll help you investigate.

Thanks for Keeping Your Plunge in Top Shape

Following this checklist will reduce the chance of summer-related issues and help your Plunge perform at its best. For further help, reach out to our Support Team or browse more articles in our Help Center.

Stay cool, stay clean, and enjoy the plunge. 🧊