Problem
Your Plunge All-In is not detecting or connecting to Wi-Fi networks when paired via Bluetooth.
Common causes and solutions
Weak Wi-Fi signal
If you're experiencing connectivity issues finding or connecting to your network, this is most commonly caused by a Wi-Fi signal. Visit this page to learn more about how to address this.
Wi-Fi network is offline
Verify that your network is up. You can usually do this by just checking your phone to make sure you are connected to it. You do NOT have to be connected to the network in order for the Plunge All-in to see it, it just has to see it.
Other causes:
- Hidden network
- Channel interference
Comments
0 comments
Article is closed for comments.