Step 1: Placing the Plunge Pop-Up

• Choose a waterproof location to place the Plunge Pop-up and remove all debris. 
• Unwrap the Plunge Pop-Up and place it. 
• The tub is 34 inches in diameter at the top ring.

Step 2: Pop-Up Poles

Insert the 6 poles into their respective slots around the tub.

Step 3: Inflate Top Ring

• Locate the black hand pump and use it to inflate the top ring.
• The Pop-Up will begin to take shape, but please note that it may not be a perfect circle until you fill it with water.

Step 4: Secure Manifold Plugs

• Find the manifold plugs pictured and place them on the drain and jet manifold, sealing them closed.
• Make sure to tighten the collars and the drain valve until they are hand-tight to prevent leaking.

Step 5: Fill the Plunge Pop-Up

• Make sure the white drain valve is in the closed position (perpendicular to the tub).
• Fill the Plunge Pop-Up with water until it reaches 4 inches from the top.

Step 6: Add Ice and Plunge!