Step 1: Placing the Plunge

• Place the Plunge on a waterproof, flat, and stable surface.
• Please note: If you have the Evolve Pro Chiller, refer to the Chiller manual for location requirements.

Step 2: Secure Manifold Plugs

There is a manifold plug on the jet port and the drain port. Make sure to tighten the collars until they are hand-tight to prevent leaking.

Step 3: Fill the Plunge

• Make sure the white drain valve is in the closed position (perpendicular to the tub).
• Fill the Plunge with water until it reaches 4 inches from the top.

Step 4: Add Ice and Plunge!