Plunge All-In Has No Power or Trips the GFCI/Breaker

The residential Plunge All-In requires a dedicated 120V, 20-amp circuit. Plug it directly into the required outlet. Do not use an extension cord.

Stop immediately and contact Support for a burning smell, hot or melted plug, arcing, buzzing, repeated instantaneous trips, or water in an electrical compartment.

If the All-In has no power

1. Unplug the unit and inspect only the exterior cord and plug.
2. Confirm the breaker is on and no other device shares the circuit.
3. Press RESET on the GFCI.
4. If it does not reset, test the outlet with a small known-working device or ask a licensed electrician to verify the circuit.
5. Reconnect the All-In directly to the dedicated outlet.

If the GFCI or breaker trips

1. Unplug the All-In.
2. Reset the breaker and GFCI once.
3. Reconnect the unit directly, without an extension cord.
4. If it trips again, stop using it and contact Support.

Do not open the electrical box, bypass the GFCI, replace an internal fuse, or repeatedly reset a tripping circuit.

Still need help?

Submit a Plunge Support request. Include your product, serial number, and the results of the steps you completed.